00 595 61 500-225

Grupo HT-SA

SNAP B300RX CAT5 TO HDMI

The B-300-HDMATRIX-4X4 uses a single Cat5e/6 output to reliably transmit HDMI signals and bi-directional IR from four sources to four displays – up to 130 feet, with full 1080p video and support for Dolby TrueHD and DTS-HD Master audio. Whew! If you think that was a mouthful, check out the RS-232 control and Binary-exclusive EDID setup

Specifications
Video SupportHDTV up to 1080P 60Hz 
PC up to 1920 x 1200 (WXUVGA)
Audio SupportSupports all HDMI audio formats including Dolby TrueHD and DTS-HD
3D SupportYes
Deep Color36-bit (12-bits per color)
Video Bandwidth6.75 Gbps
HDCP VersionHDCP 2.0
HDMI Connector TypeHDMI Type A 19 pin
1-Cat Extender Connector TypeRJ-45
Recommended Extender CableShielded CAT5e or Shielded CAT6A
1-Cat Transmission Distance200ft @1080i (24-bit)
130ft @1080p60 (24-bit)
65ft @1080p60 (36-bit)
IR Receiver Connector for Matrix Control (Green)Yes, 3.5mm Stereo powered (1)
IR Receiver for sending IR to Room (Green)Yes, 3.5mm Stereo powered (4)
IR Flasher for IR From Room (Blue)Yes, 3.5mm Mono (4)
IR Signal Frequency36-40KHz for Matrix Control, 20-60Khz Bi-directional pass through
Power Supply12V DC,5A
Locking Power ConnectorYes
Power Consumption60 Watts maximum
ColorBlack
DimensionsWidth: 17” Height: 1.75” Depth: 5.1”
Weight4.8 lbs
Certifications and ComplianceCE, FCC, RoHS
Optional AccessoriesBinary™ B-300-HDMATRIX-RCVR and 1COAX extenders
Binary™ HDMI Cables
Binary™ Shielded CAT5e & Shielded CAT6A Bulk Wire
Episode® IR products

software. This is the stuff installers dream about!