00 595 61 500-225

Grupo HT-SA


In more detail

The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing its inbuilt digital to analogue converters.

This signal is then carefully analysed and upgraded using our clever ATF2 upsampling system. Once this complex but instant process is complete, DacMagic Plus then outputs your music as a much purer, lifelike analogue signal to your amplifier.

Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.


Twin Wolfson WM8740 24bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio up-sampling / jitter reduction
Optional Digital Preamp mode allowing connection directly to power amp or active speakers
24-bit/96kHz driverless USB Audio 1.0
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Asynchronous USB transfer for very low jitter
Selectable digital filters - linear phase, minimum phase and steep
Balanced XLR audio output and RCA phono output
Two 24 bit digital inputs (with optical or coaxial for each)
External input for optional BT100 Bluetooth receiver - allows audio to be streamed and up-sampled from any paired Bluetooth device
Supports high quality apt-X Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Available in black or silver finishes


Digital to Analogue Converters:Dual Wolfson WM8740 24bit DACs
Digital filter:Analog Devices ADSP21261 DSP
upsampling to 24-bit/384kHz
Analogue filter:2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency Response:20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs:<0.001% 24-bit
THD @ 1kHz -10dBFs:<0.001%
THD @ 20kHz 0dBFs:<0.002%
Signal to Noise Ratio:-112dBr
Total correlated jitter:<130pS
Crosstalk @ 1kHz:< -130dB
Crosstalk @ 20kHz:< -112dB
Output Impedance:<50ohms
Max. output level (unbalanced)2.1V rms
Max. output level (balanced)4.2V rms (2.1V per phase)
Digital input word widths supported:16-24bit
Digital input sampling frequencies supported:32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz**, 192kHz
Audio output up-sampling:Fixed 24-bit/384kHz
Max power consumption12W
Dimensions (H x W x D):52 x 215 x 191mm
(2.0 x 8.6 x 7.6”)

*Steep filter disabled
**Digital 1 & 2 Inputs only

Headphone output

THD:at 1kHz 0dBFS 24 bit signal with 22kHz low pass filter = 0.001%

at 20khz 0dBFS 24 bit signal with 80kHz low pass filter = 0.003%
Frequency Response:10Hz - 100kHz

Recommend headphones with impedance between 32 Ohm to 600 Ohm.