00 595 61 500-225

Grupo HT-SA

PANAMAX M5300-PM

Marca: Panamax

IMPROVES PICTURE AND SOUND QUALITY

Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

MONITORS INCOMING LINE VOLTAGE AND PROVIDES A VISUAL INDICATION OF POWER LEVEL

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

REDUCES CROSS-CONTAMINATION BETWEEN COMPONENTS

The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

Specifications


General

Weight12.8 lbs.
Rack EarsIncluded
Dimensions17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)

AC Power

Under-voltage shutoff90 VAC ± 2 VAC
UL1449 Suppression Rating330V
Total Current Capacity15 A
Thermal FusingYes
Protection ModesL-N, L-G, N-G
Power Cord10 ft detachable
Peak Impulse Current72,000 Amps
Over-voltage shutoff142 VAC ± 8 VAC
Line Voltage120V, 60Hz
Initial Clamping Level200V
Energy Dissipation2125 Joules
Catastrophic Surge CircuitYes

EMI/RFI Noise Filtration

Banks 1, 2, 3, 480 db, 100 KHz ? 2 MHz
Bank 5, High Current Outlets60 db, 100 KHz ? 2 MHz

DC Trigger Input

Voltage and Polarity3 - 24V DC, bidirectional
Jacks3.5mm (1/8") mono mini-plug
Current Requirement4.6 mA @3V, 58 mA @24V

DC Trigger Output

Positive = Tip, Negative = Ring
Pass throughno delay

LAN Circuits

Wires Protected8-Wires
ConnectorsRJ-45
Compatibility10/100bT
Clamping Level52V

USB Circuit

Power Delivery500 mA @ 5VDC
JacksUSB-A

Telco Protection

Wires Protected2-Wire, Pins 4 & 5
Suppression ModesMetallic & Longitudinal
Fuseless/Auto-resettingYes
ConnectorsRJ-11
Clamping Level260V
Capacitance30pf (approx.)

Universal Coax Protection

ShieldedYes
Insertion Loss< 0.5 dB
HD 1080 i/p ReadyYes
Frequency Range0 MHz - 2.2 GHz
ConnectionsFemale "F", Gold Plated
Clamping Level75V
BidirectionalYes