00 595 61 500-225

Grupo HT-SA

PANAMAX M5400-PM

Marca: Panamax

VOLTAGE REGULATION

Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.

IMPROVES PICTURE AND SOUND QUALITY

Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

MONITORS INCOMING LINE VOLTAGE AND PROVIDES A VISUAL INDICATION OF POWER LEVEL

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

REDUCES CROSS-CONTAMINATION BETWEEN COMPONENTS

The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.


Specifications

General

Weight20 lbs.
Rack EarsIncluded
Dimensions17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)

AC Power

UL1449 Suppression Rating330V
Thermal FusingYes
Protection ModesL-N, L-G, N-G
Power Cord10 ft detachable
Peak Impulse Current72,000 A
Maximum Current Rating15 A
Line Voltage120V, 60Hz
Initial Clamping Level200V
Energy Dissipation2125 Joules
Catastrophic Surge CircuitYes
Auto-Resetting Under-voltage shutoff86V ± 6V
Auto-Resetting Over-voltage shutoff142 VAC ± 8 VAC

EMI/RFI Noise Filtration

Banks 1, 2, 3, 480 db, 100 KHz ? 2 MHz
Bank 5, High Current Outlets60 db, 100 KHz ? 2 MHz

Voltage Regulation (Banks 1-4)

Power / Current1500 VA / 12A
Output Voltage Range120 VAC ± 6 VAC
Input Voltage Range100-136 VAC
Buck Stagereduces voltage in the 125-136 V range
Boost Stage 2boosts voltage in the 100-109 V range
Boost Stage 1boosts voltage in the 109-119 V range

DC Trigger Input

Voltage and Polarity3 - 24V DC, Bidirectional
Jacks3.5mm (1/8" mono mini-plug)
Current Requirement4.6 mA @3V, 58 mA @24V

DC Trigger Output

Positive = Tip, Negative = Ring
Pass throughno delay

LAN Circuits

Wires Protected8-Wires
ConnectorsRJ-45
Compatibility10/100bT
Clamping Level52V

USB Circuit

Power Delivery500 mA @ 5VDC
JacksUSB-A

Telco Protection

Wires Protected2-Wire, Pins 4 & 5
Suppression ModesMetallic & Longitudinal
Fuseless/Auto-resettingYes
ConnectorsRJ-11
Clamping Level260V
Capacitance30pf (approx.)

Universal Coax Protection

ShieldedYes
Insertion Loss< 0.5 dB
HD 1080 i/p ReadyYes
Frequency Range0 MHz - 2.2 GHz
ConnectionsFemale "F", Gold Plated
Clamping Level75V
BidirectionalYes