00 595 61 500-225

Grupo HT-SA

NUVO NVAP161 IN WALL 6.5"

Marca: Nuvo
  • High-performance speakers are built to the same demanding requirements as your NuVo whole-house amplifier
  • Large magnets, polypropylene cones, and butyl rubber surrounds ensure premium bass response
  • Built-in mounting system to mount speakers flush with wall in seconds
  • Small-perforation grilles can be painted to blend seamlessly into your decor

Essential Info

Create your own soundscape with NuVo's In-Wall speakers. You can even paint their grille and trim to match your décor, so they'll never stand out. . . visually. These In-Wall Speakers are made with the same durable construction and high-quality performance as the Nuvo amplifier itself and are built with large magnets for increased bass response, polypropylene cones with butyl rubber surrounds for crisp, lifelike sound, and a full 12dB crossover to ensure premium tweeter and woofer performance. Plus, pivoting silk dome tweeters allow you to direct the high-range sound toward the listening area, not above your head or at your feet. 

This product can only be shipped to the billing address & only within the USA. Orders containing this item and shipping to an alternate address (non-billing address) will not be processed. The shipping & billing addresses must be the same. Canadian customers may ship to a U.S. address.


What's Included

  • Pair of 6.5" In-Wall Speakers 
  • Owner's Manual

    More Info


    The In-Wall Speakers require 16 gauge speaker wire, either 2 or 4 conductor, sold separately, and Rough-In Kit for 6.5-Inch In-Wall Speakers are available but sold separately as well.

    NuVo's 6.5-inch In-Wall Speakers are 12" x 8 3/4" and feature a power rating of 50 Watts and an 8-Ohm impedance.

    Specifications

    Specifications

    NuVo Technologies Product No.:NVAP16I
    Power Rating:50 Watts
    Impedance:8 Ohms
    Efficiency:91 dB 1W/1M
    Frequency Response:55Hz-20kHz
    Tweeter Crossover:12 db / Octave; 4kHz
    Woofer Crossover:None
    Dimensions:12" x 8 3/4"
    Cutout Dimensions:11 1/8" x 7 3/4"
    Depth:3"
    Woofer
    Magnet:10 oz / 80 x 30 x 15mm / Y35
    Voice Coil:1.0" Kapton
    Cone:Etched Polypropylene
    Surround:Butyl Rubber
    Dust Cover:Polypropylene
    Tweeter
    Magnet:Neodymium
    Dome:20mm Silk
    Type:Pivoting 30 degrees
    Warranty:5 years