00 595 61 500-225

Grupo HT-SA

TANNOY IW6TDC INWALL

Marca: Tannoy

The Tannoy IW6 TDC In-Wall Loudspeaker is a full bandwidth in wall speaker system, using a 165mm Tannoy Dual Concentric Point source, constant directivity drive unit with an additional 25mm Tannoy SuperTweeter. Designed primarily for installation into standard stud partition wall systems, it may also be used in cavity wall installations constructed with standard thickness drywall as well as a wide range of other wall construction types with a surface thickness of up to 25mm.

Key Features

  • 165mm Tannoy Dual Concentric Point
  • Constant directivity drive unit
  • 25mm Tannoy Super Tweeter
  • Extended Frequency Response and Very Low Distortion
  • Does not suffer from massive loss of energy in the vertical plane at crossover caused by two way discrete designs
  • UV/weather resistant UL94V-0 ABS construction for structural integrity
  • Dynamic high frequency protection
  • Six way self-aligning mounting system
  • Ferrofluid cooled neodymium high frequency driver


Technical Specs

System Type

In-wall loudspeaker

Frequency Response (1)

75Hz - 51kHz ( /-3dB)

Low Frequency Alignment (2)

36Hz (-6dB)

Recommended Amplifier Power

20 - 180W @ 8 Ohms

Power Handling (3)

Average: 90W

Programme: 180W

Peak: 360W

Sensitivity 2.38 Volts @ 1 metre (1)

Anechoic: 91dB

Half space: 94dB

Maximum SPL @ 1 metre (4)

Average: 110dB

Peak: 116dB

Impedance

8 Ohms

Dispersion

90 degrees

Driver Complement

Supertweeter™: 25mm (1.00”) titanium dome

Dual Concentric™: 25mm (1.00”) titanium dome Bass driver: 165mm (6.50”)

Frequency

1.8kHz, 16kHz

Type

Passive

OPTIONAL THP 60 TRANSFORMER

Maximum SPL (4)

107dB

Wattage Tap Selections

60, 30, 15, 7.5 Watts

Finish

White - paintable

Connectors

Gold plated spring terminals

Dimensions (H x W)

Front baffle: 320 x 209mm (12.60 x 8.23”)

Maximum wall thickness: 25mm (1.00”)

Cut-out Dimensions (H x W)

271.50 x 168.50

(10.68 x 6.63")

Rec. in-wall Mounting Volume

20 litres

(0.7 cu.ft.)

Mounting Depth

98.9mm

(3.89”)

Weight (each)

3kg

(6lbs 6oz)

Accessories

Pre-installation ring

Back can

Back can with 60W transformer